ESD Work Check:
A simple, one-touch method of checking to see if an operator has continuity, e.g. to the conductive / dissipative work-surface via: i) A wrist strapii) ''ESD'' FootwearIt can also be used to get an indication of whether a material is ''groundable''.
Important Note: The maximum upper limit for the dissipative mat / work surface to ground is 1 x 109 Ω. Some possible reasons for a Red Light could be: • A dirty mat / work surface• Out of spec' mat / work surface• Cable(s) disconnected• Non-ESD footwear It takes a couple seconds to see if there's continuity ... here's an example:> from the operator's finger> through the bench mat> through the mat grounding cord> through the earth facility connection> back through the bonding bracket> throught the coil cord & wrist strap> back to the operatorQuick, easy & fully portable, running on a 9V battery, it's suitable for use at:• Permenant workstation set-up• Temporary workstation set-up• Field Service Kits