CleanSweep® 20A High Performance

OnFILTER CleanSweep® 20A AC Power Line EMI Filter - High Performance

AFxxxxEG CleanSweep® filter family provides high level of attenuation for the worst type of EMI — at the lower end of the spectrum, under 1MHz, where most of conducted noise is originated— switched mode power supplies (SMPS), servo and variable frequency motors and alike. Regular EMI filters may provide adequate attenuation at higher frequencies (tens of MHz), but at lower end of the spectrum they offer little relief and often amplify noise in real-life installations.

CleanSweep® EG-series filters offer very good attenuation in both differential mode (i.e. between live and neutral) and in common mode, i.e. noise live and neutral on power lines and ground. More specifically, OnFILTER’ CleanSweep® EG-series EMI filters provide “uncommonly” high levels of attenuation for common-mode noise at the lower end of the spectrum while preserving acceptable levels of leakage currents.

CleanSweep® EG-series filters are wired to provide the best noise attenuation from its “output,” i.e. outlet, to the power line, and are very easy to install - just plug them into the wall outlet and plug your equipment into the outlet on the filter.

INCREASED UP-TIME

OnFILTER CleanSweep® filters reduce equipment downtime caused by EMI and increase its performance and productivity by providing clean power to your sensitive tools.

REAL-LIFE APPLICATIONS

Unlike typical filters designed for compliance measurements in a laboratory environment, CleanSweep® filters are optimized for effective suppression of noise in actual applications providing superb attenuation at lower frequencies where regular filters fail

SUPPRESSION OF NOISE ON POWER LINES AND GROUND

OnFILTER CleanSweep® filters provide suppression for differential (between live and neutral), common-mode (between live/neutral line and ground) and, uniquely, for ground itself

ADVANCED SURGE PROTECTION

OnFILTER CleanSweep® series filters add substantial performance improvements to conventional surge protection by reducing residual high-voltage “spikes” down to a negligible level.

OnFILTER CleanSweep® filters utilize proprietary technology to provide maximum noise suppression in actual installations, not just in the controlled laboratory envirorment.